HomeLaptop GPS Software › Need a navigation software with USA maps for my Kohjinsha SC3

Need a navigation software with USA maps for my Kohjinsha SC3

Reply to Thread
alvincyt
Member
I need a navigation software with USA maps (especially for New York) for my Kohjinsha SC3, which is compatible with its GPS device. I have tried MS Streets & Trips, but it fails to detect the GPS device on all baud rate settings.

Thank you very much for your advices.
tcassidy
Senior Member
What is your GPS device? Is it built in to the laptop? S&T will only work at 4800bps (baud) at a 1Hz refresh rate. What bit rate does your GPS run at?

Terry
alvincyt
Member
Yes it's built-in, it failed to detect the GPS device even at 4800bps, however I have no idea about its refresh rate. I believe it just couldn't be configured.
Marvin Hlavac
Laptop GPS World
www.laptopgpsworld.com
Hi alvincyt, and welcome to Laptop GPS World. In some situations GPS Gate has been known to help GPS receivers to communicate with GPS software. You may give that a try, and let us know if it works for you.
tcassidy
Senior Member
The GPS is likely fixed at 9600 bps as with the Viliv S5. Changing the COM port settings will not affect its output. As Marvin says, GPS Gate can modify that to work with S&T.

Delorme Street Atlas, iGuidance iNav and Garmin Mobile PC will work directly with that bit rate. However Garmin Mobile PC can be fussy about working with an internal GPS.


Terry
© Laptop GPS WorldContact Resources Site Map