Garmin Mobile PC Blue Screen of Death in 3D

Hi all

I finally got a chance to try out mobile pc with i.Trek M7. I turn on the gps reciever. Set it to bluetooth mode. I fired up my laptop and then mobile pc. It found the m7 withen a second locked on to gps signal. I was ready to go. I plot a route and let it do it's thing. Things were looking good. So I decided to browse the program and then it locked up...Then the screen went blue. Dam I was not impressed. So I let it reboot. After rebooting I tried mobile pc again. Seems okay got gps signal fast again. This time I turned off all the programs running in the back ground. This time I just zoomed in and out on the map........again it locked up. Same thing blue again. I rebooted one more time. This time l let the program run. I did not touch anything......a few minutes later it locks up again. Blue again. So I let it reboot again and this time i took it out of 3D view thinking this would be easier on the computer. This no more crashes. I got to my distination and back no problems. It does not look as pretty but at least it works. Hopefully this will be fixed with the next version of mobile pc.

If your wondering what kind of laptop I have
HP Paviilion
Core 2 duo 1.83
3 gigs of ram
Vista home premium

Sorry to hear about the problem . Have you downloaded the latest software update?

Never had any problems with blue screens or lockups even on my UMPC and its a lowly Celeron 900. It works great with the Itrek. I would suggest you do a little more research as to where the problem is originating. Could it be a problem with your Bluetooth?

Terry

Right now I am running the latest version of mobile pc. As for the bluetooth. If it connects there would be no problem. As of right now it connects right away. Unless there are different drivers to be had. Any idea where to get them?

Bugsy

If you wish to see if you have the latest driver for your i.Trek M7, here is a link for you (scroll all the way down to the bottom): http://www.itrekgps.com/Bluetooth%20GPS/DAC023AF-5D53-4399-BDD3-47A6C4354BAD.html

Would that be for just usb or blutooth too? I'll give it a try

Sorry, my mistake . You should really not need to install anything for BT (just for USB).

Rather than hunt around in the dark, you should debug the bluescreen. Did you write down what the bluescreen said? It'll say which module crashed, and this would give you some idea of where the problem is.

I went back to the laptop and checked the errors this is what I got
this is the first one
Problem signature
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 4105
Files that help describe the problem (some files may no longer be available)
Mini072908-01.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.
Extra information about the problem
BCCode: 9f
BCP1: 00000003
BCP2: 850E6030
BCP3: 85BA73C0
BCP4: 85D00B18
OS Version: 6_0_6001
Service Pack: 1_0
Product: 768_1


here is the second report
Problem signature
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 4105
Files that help describe the problem
Mini092008-01.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.
Extra information about the problem
BCCode: fe
BCP1: 00000008
BCP2: 00000006
BCP3: 00000005
BCP4: 899CF000
OS Version: 6_0_6001
Service Pack: 1_0
Product: 768_1
Here is the third time
Problem signature
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 4105
Files that help describe the problem
Mini092008-02.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.
Extra information about the problem
BCCode: fe
BCP1: 00000008
BCP2: 00000006
BCP3: 00000005
BCP4: 8993A000
OS Version: 6_0_6001
Service Pack: 1_0
Product: 768_1

hey guys

Do you think a power invert not putting enough power out to support the laptop would cause the lock up. 75 watt inverter puts out 60 watts continously. Where as the laptop needs 90 watts

From the fact the fan runs on my tabletoccasionally when it is working with GMPC, I would assume it is more than idling. I've tried it with Task Manager running but cpu usage is up and down.

However, that is so easy to check, either by stressing your laptop with some other program and seeing if it blue screens, plugging it into real power, or getting a slightly better inverter.

Terry

Attached Thumbnails

 

I will give it a try tomorrow. I picked up a 300 watt inverter. It puts out a steady flow of 240. I will turn on the 3D graphics on again. I am in BC right now. I am heading to Whistler tomorrow so I'll test my theory.

My guess would be that a weaker power inverter should not cause your BSOD. The inverter could be too hot, or the inverter could stop working, but it should likely not cause other issues, But a 300W unit will be better suited. I'm using 400W inverter.

Hello guys,

I just got back from my trip to Whistler. Before I left I had recharged my laptop. I ran mobile pc with the 3D turned back on. I ran on battery till there was only 30 percent left. I had no problems so far. So now for the test I plugged in the 300 watt inverter and plugged in my laptop. I could see the battery chargeing. I continued with my trip no problems. As I finished my trip there was no problem. I can only conclude at this point that the 75 watt inverter was the problem. If it happens again I will let you know.

That sounds like the issue has been solved! (Now test the 75 Watt inverter again to see if you get BSOD again. )